Movincool CM25 Service Manual User Manual download pdf (Page 74)

Repair Section

3) Take out the six (6) screws, and then remove the

ring. Loosen the set screw with an Allen wrench

and remove the fan.

4) When assembling the fan, ensure that the screws

align with the motor axis positioning holes.

CAUTION

• Tightening torque:

- 10.0 ± 1.0 ft•lbf (14.0 ± 1.4 N•m)

• Verify the clearance between the fan and case

ring. After installing the fan and fan motor,

ensure that the clearance between the fan and

case ring is at least 0.12 inch (3 mm).

5) Take out the four (4) nuts, and then remove the

motor stay.

6) Take out the four (4) bolts, and then remove the

fan motor.

CAUTION

When assembling the motor, ensure that the

wire connection ends are facing down.

I003137

Screws (6)

Ring

Fan

Set Screw

I003138

Motor Axis

Set Screw

0.12 in (3 mm)

or more

0.12 in (3 mm)

or more

I003139

Nuts (4)

Motor Stay

I003140

Bolts (4)

Fan Motor

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 88 89

No comments

Movincool CM25 Service Manual User Manual Page 74