Repair Section
52
2) Remove evaporator fan motor wire and two (2)
ties. Remove four (4) nuts from housing while
holding fan securely with one hand. Then remove
evaporator fan motor.
8.5 Removal of Condensate Pump
1) Remove fourteen (14) screws from front right
panel. (See page 43)
2) Remove the two (2) drain hoses.
3) Disconnect condensate pump connector.
4) Remove two (2) screws from condensate pump.
5) Remove tab from condensate pump.
I001941
Ties (2)
Nuts (4)
I001942
Drain Hose
Drain Hose
Connector
I001943
Screws (2)
I001944
REMOVE
Comments to this Manuals