Movincool Office Pro 10 Specifications

Technical Services DepartmentDSCA P/N: LA990009-1184 First Issue: March 2003GAC P/N: LA484007-1450 Printed in the U.S.A.DENSO SALES CALIFORNIA, INC.

4INSTALLATIONChoosing an Installation SiteCAUTION: The following are some precautions to considerbefore choosing your installation site. Please revie

5INSTALLATION (cont.)Moving the UnitUnlock the casters and push the MovinCool unit using the side handlesto a flat, level surface and set the casters

6INSTALLATION (cont.)Plugging in the Unit• Check the prongs and surface of the power cord plug for dust/dirt.If dust and/or dirt are present, wipe off

7FEATURES• An electronic control panel, which allows the user to control theunit’s operation easily.• Dual fan speeds (either HIGH or LOW) in both COO

8OPERATIONControl PanelBefore operating the unit, it is important to familiarize yourself with thebasic controls located on the control panel.1 COOL B

9OPERATION (cont.)Control Panel (Cont.)8 SET PROGRAM Allows the user to program theButton unit or check the currentprogram.9 TANK FULL LED Illuminates

10OPERATION (cont.)Operating in COOL Mode• The unit can be operated in COOL mode by pressing COOL (LEDilluminates).NOTE: In COOL mode the unit can onl

11OPERATION (cont.)Programming the UnitIn order to use the programming function of the Office Pro 10, thecurrent time and day of the week must be set.

12OPERATION (cont.)To Set a Program1. Press SET PROGRAM and P1 will show in the display. There are 7 avail-able options for programming (P1 - P7).2. P

13COOLSET PROGRAMOffice Pro 10FANHI DAY HOUR MINLOWSTART STOP CLOCK TANK FULLRUN PROGRAMTIMER30P1 start time is now 2:30 P.M.COOLSET PROGRAMOffice Pro

LIMITED WARRANTYDENSO SALES CALIFORNIA, INC. ("DENSO") warrants its MOVINCOOLProducts only to the extent stated in its official written warr

14COOLFANHI LOWSTACOOLFANHI LOWSTACOOLSET PROGRAMOffice Pro 10FANHI DAY HOUR MINLOWSTART STOP CLOCK TANK FULLRUN PROGRAMTIMER75COOL LED is flashing11.

15Note: Pressing SET PROGRAM repeatedly will cycle through programoptions.Set Program  Start  Stop  Clock  Set Temperature  Fan Cool  ExitOPERA

16OPERATION (cont.)Operating ModesThe Office Pro 10 operates in two modes, Fan Only and COOL. When inFan Only mode, the unit circulates the surroundin

17OPERATION (cont.)Emptying the Drain TankDuring COOL mode, condensate will accumulate in the drain tank.When the drain tank becomes full, TANK FULL w

18OPERATION (cont.)Installing the Condenser Plenum and Reducer• Use the three longer screwsprovided and screw thecondenser plenum into place,turning c

19OPERATION (cont.)Accessory KitThe window kit consists of the following:REDUCERS (3)CONDENSER AIR PLENUMWINDOW SPACERSCREWS (13)* DUCT CONNECTOR (4)*

20OPERATION (cont.)Accessory Kit InstructionsAttach reducers to the windowspacer by screwing them in place.Open the window approximatelythirteen (13)

21OPERATION (cont.)Accessory Kit Instructions (Cont.)Connect the other end of the ductassembly to the unit by aligningthe catch and knobs and turncoun

22OPERATION (cont.)Remote Control (Optional)1 COOL Button Activates/deactivates the COOL mode/turns the unit off.2 FAN Button Activates/deactivates th

23ABDISCHARGE HOSEDRAIN PUMPREMOVABLE PANELDRAIN PUMPRESERVOIROPERATION (cont.)Drain Pump Kit (Optional)A drain pump kit (CPK-7) is available to allow

iOPERATION MANUALOFFICE PRO 10

24DAILY INSPECTION & MAINTENANCEEmptying the Drain TankTo empty the drain tank, refer to the instructions on page 17.Cleaning the Air FiltersClean

25DAILY INSPECTION & MAINTENANCE (cont.)Filter Cleaning Method• Remove dust from the elementwith a vacuum cleaner, or rinse incold or lukewarm wat

26Self-Diagnostic CodesSelf-Diagnostic Codes will be displayed on the Control Board under thefollowing conditions:COOLSET PROGRAMOffice Pro 10FANHI DA

27TECHNICAL SPECIFICATIONSITEM/FEATURES Office Pro 10Rating Conditionsdry bulb 95º F (35º C)wet bulb 83º F (28.2º C)humidity (60%)Specificationspower

28

LIMITED WARRANTYDENSO SALES CALIFORNIA, INC. ("DENSO") warrants its MOVINCOOLProducts only to the extent stated in its official written warr

Technical Services DepartmentDSCA P/N: LA990009-1184 First Issue: March 2003GAC P/N: LA484007-1450 Printed in the U.S.A.DENSO SALES CALIFORNIA, INC.

ii

iiiTable of ContentsFOREWORD ... 1Definition of Terms ...

iv

1FOREWORDCongratulations on purchasing the MovinCool portable air conditioner.This manual explains how to install and operate the MovinCool OfficePro

2GENERAL WARNINGS & CAUTIONS• All electrical work, if necessary, should only be performed byqualified electrical personnel. Repair to electrical c

3INVENTORYAfter unpacking your MovinCool unit, please check to make sure youhave the following items:•Office Pro 10 MovinCool Unit (1)• Operation Manu