Movincool OFFICE PRO 12 Specifications

OPERATION MANUAL OFFICE PRO 12 / OFFICE PRO 18 / OFFICE PRO 24INSTALLATION AND USAGE AND READ ALL SAFEGUARDSREAD THIS MANUAL CAREFULLY FOR INSTRU

! WARNING:!CAUTION::INSTALLATION (cont.)Plugging in the Unit1) Check the prong and surface of the power cord plug for dust/dirt. If dust and/or d

a. Tank Fullb. Temperature sensor failsc. High pressure switch error (model OP24 only)Connecting Warning Signal From Controller1) Remove service panel

12 ! WARNING ! CAUTIONPROCEDURE<FRONT VIEW>TYPE 1 TYPE 25. If test fails, do not use.4. Press reset button once again for use. Ligh

For all models:1) A digital electronic control panel, which allows the user to control the unit’s operation easily. 3) Digital LCD display with bl

Control Panel12567834OPERATIONBefore operating the unit, it is important to familiarize yourself with the basic controls located on the control panel.

Control Panel (Cont.)LCD Indicators13) PROGRAM ONIlluminates to indicate program is running.15) STOPIlluminates to indicate program stop time.91415161

163) Press ENTER button to set Hour.5) Press ENTER button to set Minute.NOTE: User should check clock periodically to confirm clock accuracy. Operatin

How to Set a ProgramSET START TIME2) Press “SET TEMP” buttons to select day of the week.3) Press “ENTER” button.4) Press “SET TEMP” buttons to s

18How to View and Delete Program1) Press and hold the SET PROG button for 3 seconds or untilbeep.2) To view edited program - While pressing and holdin

Operating Modes1) COOL Mode2) Temperature Control3) Fan Mode Control DIP Switch4) Temperature Scale Display DIP SwitchOPERATION (cont.)The Office Pro

© 2007 DENSO SALES CALIFORNIA, INC.All rights reserved. This book may not be reproduced or copied, in wholeor in part, without the written permission

*OPERATION (cont.)Empty the Drain TankDuring COOL mode, condensate will accumulate in the drain tank.When the drain tank becomes full, the FULL TANK L

&+5%*#4)'*15'&4#+027/2&4#+027/24'5'481+4MOVINCOOLOOOPERATION (cont)Drain Pump Kit (Optinal)A drain pump kits are av

* Not available for OP12 Model TROUBLESHOOTING22LCD Display Codes ConditionSelf-Diagnostic CodesSelf-Diagnostic Codes will be displayed on the Control

FILTERWIRE FRAMEDAILY INSPECTION & MAINTENANCEEmpty the Drain TankTo empty the drain tank, refer to instruction on page 20.Clean the Air Filters

FILTERDAILY INSPECTION & MAINTENANCE (cont.)Filter Cleaning Method 1) Remove dust from the element with a vacuum cleaner, or rinse in cold or

Check the following items before calling a qualified technicianSYMPTOMUnit does not operateInsufficient CoolingPOSSIBLE CAUSEREMEDY1) Ground fault bre

ITEMS/FEATURES Office Pro 12 Office Pro Pro 24TECHNICAL SPECIFICATIONS26Rating Conditions Dry bulbWet bulb Humidity Specification Power frequency

.+/+6'& 9#44#06;PURCHASE DATE :AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAASERIAL NUMBER :AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA

DENSO SALES CALIFORNIA, INC. 3900 Via Oro Avenue Long Beach CA 90810-1868800-264-9573 / 310-834-6352www.movincool.com P/N : GX484007- 2111S

OPERATION MANUALOFFICE PRO 12 / OFFICE PRO 18 / OFFICE PRO 24

FOREWORD Definition of TermsGENERAL WARNINGS & CAUTIONS InventoryINSTALLATION Choosing an Installation Site

!!FOREWORDCongratulations on purchasing the MovinCool portable air conditioner.This manual explains how to install and operate the MovinCool Office Pr

GENERAL WARNINGS & CAUTIONS1) All electrical work, if necessary, should only be performed by qualified electrical personnel. Repair to electri

OFFICE PRO 12 MOVINCOOL UNITOFFICE PRO 24 MOVINCOOL UNITPRODUCT REGISTRATIONMOVINCOOLOOFFICE PRO 18 MOVINCOOL UNITMOVINCOOLOINVENTORY7After unpacking

8) Do not use the unit at condition above 95°F 60%RH.7) Allow 18 inches of unobstructed airflow for both the air inletsand outlets.6) Install the unit

Left Side HandleMOVINCOOLOINSTALLATION(cont.)Moving the Unit Unlock the casters and push the MovinCool unit using the side handles to a flat, lev