Movincool Office Pro 10 Specifications download pdf (Page 29)

DISCHARGE HOSE

DRAIN PUMP

REMOVABLE PANEL

DRAIN PUMP

RESERVOIR

OPERATION (cont.)

Drain Pump Kit (Optional)

A drain pump kit (CPK-7) is available to allow continuous operation and

to eliminate the need for a drain tank.

• When the water collects to level

(A) in the pump reservoir, the drain

pump begins to operate and

discharges the water.

NOTE: The compressor will not operate while the drain pump is

discharging water. The info display area will show AU code while

the pump is discharging the water. When the pump has discharged

the water from the reservoir the AU code will no longer be dis-

played.

• When the water level drops below level (B), the drain pump stops,

and the compressor will restart.

NOTE: If the Fan Mode Control DIP Switch (see pg. 16) is set to the

STOP position, the entire unit (including fan operation) will turn off

when the drain pump is discharging water.

NOTE: Before a drain pump can be installed, a pump attachment

plate must be attached to the base of the pump. This pump plate

must then be secured to the base of the unit. Do not install the

condensate pump without the pump plate.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 35 36

No comments

Movincool Office Pro 10 Specifications Page 29