Movincool Office Pro 10 Specifications download pdf (Page 31)

DAILY INSPECTION & MAINTENANCE (cont.)

Filter Cleaning Method

• Remove dust from the element

with a vacuum cleaner, or rinse in

cold or lukewarm water. If the

element is extremely dirty, wash

with a neutral detergent.

• After the element has been

cleaned, rinse with clean running

water, allow to dry, then reinstall.

In-Season/Off-Season Inspection & Maintenance

■ In-Season

• Check the prongs and surface of the power cord plug for dust

and/or dirt. If dust and/or dirt are present, wipe off with a clean,

dry cloth.

• Check the power cord, plug and prongs for damage or excess

play. If any damage or excess play is found, contact your

MovinCool reseller for repair.

• Check the air filters and drain tank.

• Clean the outside of the unit with a damp cloth or mild nonabra-

sive cleaner.

■ Off-Season

• Operate the unit in Fan Only mode for 8 hours.

Note: Operation is necessary to dry out the inside of the unit.

• Disconnect the power cord from the AC outlet.

• Check the prongs and surface of the power cord plug for dust

and/or dirt. If dust and/or dirt are present, wipe off with a clean,

dry cloth.

• Check the power cord, plug and prongs for damage or excess

play. If any damage or excess play is found, contact your

MovinCool reseller for repair.

• Clean the air filters.

• Empty all water from the drain tank.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36

No comments

Movincool Office Pro 10 Specifications Page 31