Movincool Office Pro 10 Specifications download pdf (Page 12)

INSTALLATION (cont.)

Plugging in the Unit

• Check the prongs and surface of the power cord plug for dust/dirt.

If dust and/or dirt are present, wipe off with a clean, dry cloth.

• Check the power cord, plug and prongs for damage or excess play.

If any damage or excess play is found, contact your MovinCool

reseller for repair.

WARNING:

• If the power cord or plug is damaged, repair should only be

performed by qualified electrical personnel.

• Do not connect/disconnect the power cord or attempt to

operate buttons with wet hands. This could result in electrical

shock.

CAUTION:

• The AC outlet (115 VAC Single Phase, 60Hz) needs to be rated

at 15A or higher. Do not share the outlet with any other instru-

ment or equipment.

NOTE:

• Make sure the AC outlet is free of dirt, dust, oil, water, or any

other foreign matter.

• The Office Pro 10 model is equipped with an approved NEMA

plug configuration (5-15). The appropriate outlet must be used

for this plug type.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 35 36

No comments

Movincool Office Pro 10 Specifications Page 12