Movincool Office Pro 10 Specifications download pdf (Page 24)

OPERATION (cont.)

Installing the Condenser Plenum and Reducer

• Use the three longer screws

provided and screw the

condenser plenum into place,

turning clockwise to tighten.

Tighten to 1.6 lbs•in torque or

until secure.

• Align the reducers’ four (4)

screw holes to the four (4)

screw holes of the exhaust air

discharge flange. Fasten the

screws into place with a

Phillips head screw driver,

turning clockwise to tighten.

Tighten until secure.

LIP

EXHAUST AIR

DISCHARGE

FLANGE

REDUCER

CONDENSER

AIR PLENUM

• Align the three notches at the

base of the unit with the three

tabs of the condenser plenum.

Fit all three into place and tilt

condenser plenum up toward

the unit.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 35 36

No comments

Movincool Office Pro 10 Specifications Page 24