Movincool Office Pro 10 Specifications download pdf (Page 10)

INSTALLATION

Choosing an Installation Site

CAUTION: The following are some precautions to consider

before choosing your installation site. Please review carefully as

improper installation may result in personal injury or damage to the

unit.

• Do not use the unit in areas where leakage of flammable gas may

occur.

• Do not use the unit in areas where it will be exposed to rain or

water.

• Do not use the unit in an atmosphere of excessively corrosive gas

or vapor.

• Do not use the unit in areas where the temperature is outside the

allowable operating range.

• Do not install the unit in sloping areas. The unit may move or topple

over even if the casters are set to the LOCKED position.

• Install the unit in areas that can withstand the weight of the unit.

The Office Pro 10 unit weighs approximately 130 lbs (59 kg) (when

the drain tank is full of water).

• Allow 20 inches of unobstructed airflow for both the air inlets and

outlets. The inlets are located on the back of the unit. The outlets

are located on the front of the unit.

• Do not use the unit above 95˚F 60% RH.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 35 36

No comments

Movincool Office Pro 10 Specifications Page 10