Movincool Office Pro 60 Specifications download pdf (Page 28)

TROUBLESHOOTING

Check the following items before calling your MovinCool reseller or a qualified

technician.

If conditions persist after the above actions have been taken, turn the unit off,

disconnect the power and contact your MovinCool reseller or a qualified

technician.

Condition Possible Cause Remedy

Unit does not operate.

1. Ground fault breaker trip or

LCDI power cord trip.

Reset breaker or reset power

cord.

2. Drain tank is full.

(“TANK FULL” LED flashes.)

Empty the drain tank.

3. High pressure switch

activated 10 times in 24

hours.

1. Clean air filter.

2. Check inlet and outlet air to

make sure that there are no

objects preventing the air

flow into or out from the unit.

3. Check environmental

condition whether it is within

operation range or not.

4. Reset controller

To RESET: Press FAN HI/ LO

and COOL ON/OFF buttons

simultaneously for 5

seconds, controller returns to

normal operation.

Insufficient cooling.

1. Dirty/Blocked air filters. Clean air filter.

2. Air inlet/outlet blocked. Clean air inlet/outlet.

3. Improper temperature setting. Adjust temperature setting.

1 2 ... 23 24 25 26 27 28 29 30 31 32

No comments

Movincool Office Pro 60 Specifications Page 28