Movincool 30HU User Manual download pdf

Fig. 3

Fig. 2

Fig. 1

Sub Control Box

Compressor Relay

Sub Control Box

Manual P/N: 484007-3700 First Issue: May 2012

Compressor Relay (1)

Screw (2)

M4 × 0.7, L=10

Screws (6)

Screws (2)

Left Rear Panel

Left Front Panel

Screws (4)

Compressor Relay (Part No. 484530-0660)

in the unit immediately after the power is disconnected.

Screws (2)

Power Cord

Conduit

1. Inventory

After unpacking, please check to make sure you have the following items. If any of these items

were not included in the box or appear damaged, please contact your MovinCool reseller for

replacement (See Fig.1).

INSTALLATION MANUAL

For 30HU (Classic 40) - Serial Number: 0401XXXX to 0807XXXX

WARNING: Disconnect power supply from the 30HU (Classic 40) unit before

performing any service. Beware that some residual voltages may remain

2-1. Remove six (6) screws and take off the left rear panel. Loosen two (2) screws fixing the

2-2. Remove all compressor wires (black) and two (2) screws from the compressor relay

in the sub control box. Then take off the compressor relay.

power cord conduit. Then remove four (4) screws and take off the left front panel.

2. Removal of Old Compressor Relay

1 2

INSTALLATION MANUAL 1
Screen Sheet 2

Summary of Contents

Page 1 - INSTALLATION MANUAL

1Fig. 3Fig. 2Fig. 1Sub Control BoxCompressor RelaySub Control BoxManual P/N: 484007-3700 First Issue: May 2012Compressor Relay (1)Screw (2)M4 ×

Page 2 - Screen Sheet

23-1. Cut out the screen sheet on the last page of this manual (See Fig. 4). Confirm the referencehole on the sub control box to be matched with the r

Comments to this Manuals

No comments

Movincool 30HU User Manual

Browse online or download User Manual for Hardware Movincool 30HU. MovinCool 30HU User Manual

Summary of Contents

Comments to this Manuals